For a pair of jeans, there are generally 8 data to be measured: waist circumference, hip circumference, thigh circumference, foot circumference, pants inner length, pants outer length, front wave, back wave. When these 8 key data are determined, then this pair of jeans will basically take shape. The following will introduce the measurement methods of these 8 key data.
1. How to measure the waist circumference of jeans?
Waist circumference is the most critical place, first relax the jeans flat, pay attention to natural flat, do not deliberately straighten. Measure along the waist top straightness according to the figure below, and multiply the measured length by 2 to get the waist circumference.
2. How to measure the hip circumference of jeans?
A: Locate the hip measurement point
The hip measurement point is 3.4-4 inches up from the bottom of the cross wave, that is, about 8.6-10 cm. The bottom of the cross wave is commonly referred to as the center point of the cross seam at the trousers. In the first figure below, the upper horizontal line of the red “work” is the starting point for hip measurement.
B: Measure hip circumference
Hip circumference is also called sitting circumference. The size of the hips directly affects the outline of the big curve.
When measuring the hip circumference, follow the figure below, and use the 3.4-4 inches upwards of the cross wave as the positioning point (3.4 inches for women and 4 inches for men). The sum of the two sides of the “V” shape at the soft ruler in the figure is the hip circumference , The two sides of the “V” shape of the ruler are as parallel as possible to the natural V shape formed by the front half of the waist when the jeans are naturally laid flat.
3. How to measure the thigh circumference of jeans?
As shown in the figure, at 1-2 inches under the cross wave, measure the leg of the trousers straight (perpendicular to the hem seam, and multiply the length by 2, which is the thigh circumference.
4. How to measure the foot circumference of jeans?
Look at the straightness along the side of the trousers and multiply the length by 2 to get the trousers circumference.
5. How to measure the inner length of jeans?
Because the length of jeans is affected by high school and low waist, sometimes the size obtained through foreign length does not fit well. The most accurate trouser length measurement is the inner length. (As shown in the figure, the straightness from the bottom of the cross wave to the foot is the inner length (the inner length of the straight line length will determine the position of your gear.
6. How to measure the outer pants length of jeans?
As shown in the figure, the straight line length from the top of the trouser waist along the hem of the trousers to the hem of the trousers is the outer trousers length.
7. How to measure the front wave of jeans?
Starting from the front cross bottom, go straight to the top of the waist.
8. How to measure the back wave of jeans?
Look at the picture on the back of the trousers and start to make the waist straight along the back middle bone.
As a professional jeans manufacturer, we can customize any size of jeans as your requirement, from S to 3XL and also can follow customer size chart to make.