Bloomers are the name of a modern trousers garment. The trousers are straight and wide, the trouser openings are tightened, the waistband is caulked with elastic bands, the upper and lower ends are tightly narrow, and the middle section is loose and fat, shaped like a lantern. The bloomers are mostly made of soft silk…
Under normal circumstances, khaki pants are standard four-pocket pants. Two at the front and two at the back. Of course, this is not a problem. It should be noted that the pockets of the thin version of khaki pants, especially the two front pockets, are best not to hold anything. After all, it’s a very…
Khaki pants refer to pants made of khaki cloth, generally trousers. In 1848, Harry Lumsden of the British Army invented khaki pants in order to enable soldiers to fight better on the scorching Indian savannah. The color of the khaki pants is dyed with a deep purple-red juice extracted from the leaves of the tea…
Culotte in the middle of the seventeenth century is considered the originator of modern trousers. At that time, the knee-length coat “Justaucorps”, the slightly shorter “Veste”, and the tight and body half-length pants “Culotte” appeared on the stage of history together, forming the composition of modern three-piece suits and many Dressing habits. In the “Culotte”…
The crotch openings of straight-leg pants are generally not rolled up. Due to the large leg openings (same as the middle crotch), the trousers are straight, so it has a neat and stable feeling. When cutting, the hips can be slightly tight, and the middle crotch should be slightly raised, which can better reflect the…
How should I maintain my pants? Basic washing method A. Before putting dark jeans into the water for the first time, use white vinegar + water (white vinegar: water, 1:20) or soak in salt water for about 20-30 minutes to maintain the original color. B. Wash dark and light colors separately: mixing together will cause…
Tapered trousers, also called trousers with small feet, as the name suggests, tapered trousers are the type of trousers in which the trousers gradually tighten as they go down. The size of the trousers gradually shrinks from the waist to the trousers, and the size of the trousers is generally similar to the size of…
The so-called flared pants are named after the trouser legs are shaped like horns. Its characteristics are: low waist, short crotch, tightly wrapped around the hips; the trouser legs are narrow at the top and wide at the bottom, gradually opening from below the knee. The size of the trouser opening is obviously larger than…
Straight trousers are also called “tube trousers”. The crotch openings of straight-leg pants are generally not rolled up. Due to the large leg openings (same as the middle crotch), the trousers are straight, so it has a neat and stable feeling. When cutting, the hips can be slightly tight, and the middle crotch should be…
Jeans are made of a kind of indigo denim (denim) with straight crotch trousers. The trouser legs are narrow. After shrinking, they wear trousers that tightly wrap the hips. It was first recorded in 1567 as a title for the pants worn by merchant sailors from the Italian port city of Genoa. Pants selection skills…
The color of the jeans In the past, the organization and color of the trousers were very simple, and the trousers fabrics have gradually become fashionable, and the colors have also become rich. But basically indigo and blue-black are the main ones. The main reason is that the effect of blue washing water is the…
Essentials of Cutting Women’s Pants Use the smooth edge of the fabric to take the waist and fold the remaining part, then cut the front and back pieces. For fabrics with inverted smoothness and luster, cut the front and back pieces in the same direction. Because the front opening of the illustration is the same…
The basic type of pants can be said to be worn by anyone. According to different preferences, the live pleats of the front sheet can be changed to shirring and so on. Fabric: You can use general wool, cotton, linen fabrics and chemical fiber fabrics. If the color is black, gray, navy blue, brown, etc.,…
There is a big difference in body shape between men and women, so there are different ways in the cutting process of pants. The waist of the male body is higher than the waist of the female body than the waist of the male body, so they determine the same height The pants length and…
How to design front panels of pants? Start drawing from the first film. The hip line takes 1/3 of the rise, as the margin of the circumference, add 2cm-3cm to H/4. On the rung line, measure the hips in 4 equal parts and extend the thickness to the left by 1/4 (the width of the…
There are many names for men’s pants, which can be divided into four types: tube pants, bell-bottom pants, cone pants, and loose pants. Pants have a variety of designs and functions, and there are many ways to wear them. There are many kinds of side-opening bags and back-opening bags alone. The design of the front…
The production of denim originated in the United States. Levi Strauss was originally a German Jew. The first denim was born in the middle of the 19th century, and it was only put into mass production in the United States in the 1890s. At that time, Americans were extremely proud of the birth of denim…
